Blackhawk Hilux 05-on KUN26 Upper Control Arms

Hilux 05-on KUN26 Blackhawk heavy duty upper control arm kit.

The heavy duty Roadsafe "BLACKHAWK" range of Upper Control Arms have been designed with ease of fitment and ongoing serviceability in mind, and are a necessity when lifted more than 30mm. Max recommended lift with these arms is 75mm, if higher extended ball joints can be used with careful attention paid to alignment and bump stop issues.
The Roadsafe "BLACKHAWK" arms have been designed to restore camber & caster lost on the IFS vehicles once they have been lifted, by correcting the angle of the ball joint.

Without restored camber & caster settings lifted IFS vehicles will eventually show excessive tyre wear and experience ride and steering issues.
With greater radius and tube sizing (Heavy Duty 32mm OD, 6mm wall thickness STKM11A Carbon Steel Tube) to suit, the designs allow clearance of the coils during articulation, with the outer radius also adjusted to allow for the fitment (in some cases) of 35" tyres without having the issue of the tyres rubbing on the arms during full lock.
There is no complicated ball joint or bushing setup, the design takes OEM componentry so the OEM or aftermarket ball joints and bushes will go straight in.
Blackhawk upper control arms come fitted with the 'Next Gen High articulation HD' chromoly greasable ball joints.
Roadsafe "BLACKHAWK" Upper arms are designed with 3 degrees fixed caster, and are optimally suited to lifts of 30-70mm, finished in black E-Coating for maximum durability, rust prevention and discreet installation.